custom gift for babyPosition

HOME: custom gift for baby > custom christmas gifts >

Tel
custom christmas gifts DIY Large Wall Art On a Budget! pillow covers farmhouse

Author: admin  Updated: 2020-01-18 09:44 Views: 50

Hello friends! I have SUCH a cool tutorial for you today! I have found that as I try to decorate our home on a budget, large wall art can be a challenge because it can get really expensive, really fast! We've come up with some solutions in the past, like our DIY half frames hanging from pipe and this large scale print in our dining room, but I didn't want to use any of those methods when creating large wall art for Avery's soon-to-be new bedroom (in case you are new here, we are in the process of separating our twin girls' bedrooms). Socustom christmas gifts, we came up with a new way to create large wall art ourselves to create a BIG impact on a very small budget (it cost me about $21 per print–;there's a cost breakdown at the end of this post)!This post is sponsored by Mohawk Consumer Products and contains some affiliate links.Click here to read my full disclosure policy.

Materials and tools needed:

personalized baby blankets

Note:Below I list what we used to complete the project. We used power tools because we have them, but you can ABSOLUTELY make this DIY art without power tools! If you have a hand saw, a utility knife, a hammer & nails and a hand-held staple gun, you would be good to go!

Steps:

I recommend watching the short video below first, because it gives a great overview of this project start to finish, including how to spray mount your prints. Below the video I go into more detail about how to make the actual frames.

We made the frames for our large wall art using butt joints.Butt joints are simply two pieces of wood attached perpendicularly to each other. They are great to use when you want a more rough or rustic look, which is precisely what I wanted for these frames!

1) Cut the horizontal (top and bottom) pieces of your frameto the same width as your print.We used our compound miter saw, but again, you could easily make these cuts with a hand saw and miter box.

2) Cut the vertical (side) pieces to the same height as your printminus twice the width of your wood.

3) Butt your joints together, as shown below, making sure that the horizontal pieces sit on top of the vertical pieces. We like to use right-angle clamps to hold our joints tightly together until we nail them in place.

4) Nail your joints together by driving nails through the horizontal pieces into the vertical pieces.

5) If you want your oversized photo print to sit flush with the wood frame, you can use a router to create a small channel on the back of your frame that is the same depth as your mounted print. This is totally optional! If you don't have a router, you can staple your print right onto your frame (after staining it). You just may be able to see the mounted print if you look at it from the side.

6) Fill your nail holes with wood putty. Once it has dried, sand the surface smooth.

7) Stain the frame for your large wall art. Since we wanted a pop of color around these black and white prints, we choseBehlen Solar Lux stain, which is the most vibrant color stain I have ever seen. I used Sea Blue and gently wiped it on with a paper towel, being sure to rub with the grain of the wood. You can see how gorgeous the color is on this scrap piece of wood that I tested it on.

8) Once your stain is dry, staple your mounted print into your frame and attach hanging hardware to hang it up! These are really light weight, so they are perfect for hanging in kids' rooms.

That's it! We are THRILLED with how Avery's large wall art turned out! It took us an afternoon to make all four and we did it while our kids and dog enjoyed playing outside as we worked. Easy, peasy! And this is an extremely affordable art option. Here's a breakdown of the cost:

pillow covers farmhouse

Today I am participating in a fun Blog tour designed to give you guys loads of fun and creative ideas to organize your creative space.

So this is my first instructable, and I made a key holder for my house keys with a pocket for my front gate remote controller . I do not have a sewing machine so everything I do here is by hand. If you have a machine it will probably be better :)



Powered by custom gift for baby @2018 RSS Sitemap html Sitemap

Copyright 站群系统 © 2013-2019 Personalize